Your model number may exist located in a variety of locations:

Top-freezer Refrigerator Side-by-Side Refrigerator French-door Refrigerator

Places to look:

  • Ceiling of refrigerator interior
  • Inside walls of fridge or freezer (possibly behind drawers)
  • Frame behind the door when the door is opened
  • Behind the kickplate
  • On the back of the refrigerator

A sample model number label looks like this:

Once you find your rectangular product tag, your model number is located on the left, middle side of the tag. Note: the model number is different from the serial number.

A woman fills up a water bottle from a refrigerator water dispenser.

How to supplant your fridge water filter

Your refrigerator h2o filter works hard to keep your drinking water make clean and tasting fresh. In gild to continue it that mode, it needs to exist routinely inverse—nosotros recommend once about every 6 months. It's easy to locate your filter and supercede it with a fresh one. Keep reading to larn how to easily find and supervene upon your Whirlpool® refrigerator h2o filter.

Finding and replacing your fridge filter

Earlier you can supercede your refrigerator water filter, yous need to know what you take. Await for the number printed on it or find the approved h2o filter for your Whirlpool® refrigerator.

Intendance tip: In one case yous know your filter type, consider purchasing a subscription to automatically send a replacement filter every 3 or six months.

Select your water filter

Choose your filter from the products listed beneath to follow simple replacement steps or watch a video on how to alter your Whirlpool® refrigerator h2o filter.

Filter 1: Step-by-stride instructions

  1. Locate your h2o filter cover in the upper correct-hand corner within your refrigerator or in the base grille.
  2. Elevator the filter door up.
  3. Pull the filter out and discard it.
  4. Open your new filter and remove the protective coverings from the O-rings. Make sure the O-rings are still in place after the cover has been removed.
  5. When inserting the new filter into the slot, brand sure the arrow is pointing upwards. Practise not forcefulness the water filter. If it does not slide in easily, rotate information technology until the notches are properly aligned with the grooves.
  6. Push the filter door airtight and so it snaps into place.
  7. Once your filter is replaced, run four gallons of h2o through the line to properly affluent the new filter.

Filter 2: Pace-by-step instructions

  1. Locate your water filter cover in the upper correct-hand corner within the refrigerator.
  2. Pull open up the filter door.
  3. Pull the filter and then it's angled down, plough it to the left and pull. Discard the erstwhile filter.
  4. Open up your new filter and remove the protective coverings from the O-rings. Make sure the O-rings are still in identify after the cover has been removed.
  5. When inserting the new filter into the filter slot, make sure the arrow is pointing up. Equally you push in, the filter will brainstorm to rotate.
  6. Turn the filter clockwise until information technology locks.
  7. Push the filter door closed and then it snaps into place.
  8. Once your filter is replaced, run iv gallons of water through the line to properly flush the new filter.

Filter 3: Step-by-footstep instructions

  1. Locate your water filter cover on the left side of the refrigerator's base grille.
  2. Push the eject push button to release the filter.
  3. Pull the filter out and discard it.
  4. Open your new filter and remove the protective coverings from the O-rings. Be sure the O-rings are still in place afterward the embrace has been removed.
  5. Identify the filter cap on the new cartridge then the ridges marshal. Turn the cap clockwise to lock into identify.
  6. When inserting the new filter into the slot, make sure the arrow is pointing to the left.
  7. Push the filter in until the eject button pops back out.
  8. Once your filter is replaced, run four gallons of water through the line to properly affluent the new filter.

Filter 4: Stride-by-step instructions

  1. Locate your water filter cover in the upper right-hand corner of your refrigerator interior.
  2. If the filter tab in your refrigerator is facing outward, push on it and pull the cover down. If the tab is on the bottom of the cover, pull frontwards and down on the small lever to open the cover.
  3. Turn the filter to the left and pull. Discard the former filter.
  4. If this is a start-fourth dimension installation, y'all'll notice a cap inside the filter slot. Turn it counterclockwise and pull it out.
  5. To insert the new filter in the slot, line it up with the grooves, push button in and turn it to the correct.
  6. Button upwardly on the filter to lock in identify.
  7. Push the filter door upward so that it snaps closed.
  8. Once your filter is replaced, run four gallons of water through the line to properly flush the new filter.
A Whirlpool® refrigerator in a kitchen

Demand your model number?

Whirlpool® refrigerators display their model number information in unlike locations. Consult our guide to notice yours.

More than cleaning tips and tricks

  • How to Clean a Dishwasher Filter

    How to Clean a Dishwasher Filter Cleaning your dishwasher filter is easier than you lot might think. We'll evidence you how to remove, make clean and replace your dishwasher filter in just minutes.

  • How to Clean a Microwave Inside and Out

    How to Clean a Microwave Inside and Out Exercise you take microwave cleaning questions? Read our guide to acquire how to clean your microwave speedily and simply, from the interior to the turntable.

  • How to Clean a Refrigerator

    How to Clean a Refrigerator Cleaning the inside of your fridge is an important household task. Learn how to clean a fridge quickly, easily and effectively with our guide.

Gold home heartbeat logo over image of a tablet with Whirlpool blog page displayed in the background

home heartbeat

Ready for more tips, home hacks and appliance guides?

Was this article helpful? Pass it on